Brevi turbo t180sr Manuel D'utilisation Et D'entretien page 21

D
Model
A
118
1.3.1 DESCRIPTION
The mainly consists of a metal structure that
includes the central linkage with three-point hitches (2 Fig. )
and a rotor with knives (
all of which is driven by a belt transmission installed at the side
(7 Fig. ). The power that drives the machine is transmitted by
the tractor through a driveline (with CE marking) which meshes
in a central position with the PTO (
(5 Fig. ) following which it is transmitted to the bladed rotor by
means of the side transmission belt (7 Fig.
types of cutter can be mounted:
universal knives ( Fig. ) for cutting grass and the stub-
ble of light crops such as: barley, oats, wheat, etc.
hammers ( Fig. ) for cutting more consistent vegeta-
tion, such as grass and branches up to 5-6 cm in diameter,
etc.
Thanks to its high speed, the rotor is able to accurately shred
the plants with which it comes into contact, allowing the vege-
tation to easily convert into fertilizing humus. The mechanical
shredding action produced by the machine improves the natural
fertility of the soil and thus reduces the amount of chemical
fertilizer required.
1.3.2 USE
The must only be used for agricultural purposes,
can be used to shred grass and woody plants. The machine has
been designed for use on farming-forestal land. It is therefore
not suitable for excavation work of any kind. The cutting height
should be chosen with care to prevent the cutting tools from
hitting against stones or other objects that could damage the
machine itself. One single operator seated on the tractor is able
to carry out the various operations required. Any other use of
relieves for Manufacturer from all and every liability for deriving
damage to persons, animals or property.
B C D
inch inch inch inch
109 52 51
Fig. ) situated in the lower part,
Fig. ) of the overdrive unit
Fig.2
Weight Power
lb HP kW
3000 130 - 180 96 - 134
- 21 -
turbo t 180sr
B
A
# tools Belts
Hammers Knifes #
25 - 5
RPM
1000