Product Description - Novatech TONN Mode D'emploi

9

Product Description

A
F
Illustration 1: Components
The folding device is placed on the basic block. The stent is folded in the folding device with the aid of the clamping rod, then
pushed into the introducer tube with the aid of the loading rod, and subsequently pushed out of the introducer tube using the
pusher.
10 Material
• Stainless steel
• Plastic
Not made with natural rubber (latex).
No products made with natural rubber (latex) are used in the production process.
11 Lifetime
[ }Limitations on Reprocessing, page 18 ]
12 Shelf Life and Storage
Before first processing:
Store the product in unopened original packaging.
Storage
Use
Table 10: Use and Storage Conditions
13 Possible Complications and Side Effects
Does not apply.
14 Combining with Other Procedures
Does not apply.
A
B
C
B
D
C
E
F
D
E
Temperature
-20 °C - +60 °C
+10 °C - +40 °C
Basic block
Clamping rod
Folding device
Pusher
Introducer tube
Loading rod
Relative humidity
10% - 90%
30% - 70%
English
17