Bitzer CM-RC01 Instructions D'installation page 40

On the right side, the configuration required by the GSM module to establish the 3G internet connection can be set
from the following options:
• APN (access point name)
• user name
• default gateway IP address
Hit S after the settings (available from the SIM card provider) have been entered.
AVE
8 SIM card installation
NOTICE
!
!
Integrated circuits on computer boards are sensitive to static electricity. To avoid damaging components by
ESD, observe the following precautions.
• Before handling a board or integrated circuit, touch an unpainted portion of the gateway chassis for a few
seconds. This will help to discharge any static electricity on your body.
• When handling boards and components, wear a wrist-grounding strap.
Step 1
Fig. 17: Open the gateway housing with a screwdriver.
CT-311-5 // PDF Download 40