Publicité
Les langues disponibles
Les langues disponibles
1
Assemble the pedestal
2
Attach the TV to the pedestal
2
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way
when using the wall-hanging bracket or repacking the
TV.
1
Remove the assembly screws
2
Pull out the pedestal from the TV.
3
Remove the assembly screws
2
1
1
from the TV.
from the bracket.
Wall mounting the TV (optional)
Please contact a professional installer to purchase
the recommended UL qualified wall-hanging bracket.
For additional details, please refer to the wall-hanging
bracket installation manual.
Rear of the TV
a
b
Screw for fixing the TV onto the wall-hanging
bracket (not supplied)
■
Holes for wall-hanging bracket installation
a: 15.8" (400 mm)
b: 7.9" (200 mm)
■
Screw specification
Depth of screw
Type
Minimum
M6
0.40" (10 mm)
Warning
●
Always be sure to ask a qualified technician to carry
out set-up.
●
Do not mount the unit directly below ceiling lights
(such as spotlights, floodlights or halogen lights) that
typically give off high heat. Doing so may warp or
damage plastic cabinet parts.
●
Take care when fixing wall brackets to the wall.
Always ensure that there are no electrical cables or
pipes in the wall before hanging bracket.
●
To prevent fall and injury, remove the TV from its
fixed wall position when it is no longer in use.
●
Incorrect wall-hanging bracket or incorrect fitting
may cause equipment to fall, resulting in injury and
product damage.
●
Panasonic disclaims liability for any damage or injury
arising from incorrect wall-hanging bracket, incorrect
fitting or otherwise failure to follow the above
instructions.
(View from the side)
Depth of
screw
Maximum
1.10" (28 mm)
9
English
Publicité
