Publicité
Les langues disponibles
Les langues disponibles
■
[MPEG NR]
Reduces picture noise in MPEG-compressed video.
[Off / On]
– For Digital TV only and except for [Game] in [Picture
mode].
■
[3:2 pulldown]
Adjusts the picture recorded in 24 fps for optimum
quality. [Off / Auto]
■
[Aspect adjustments]
– [Screen format]: Changes the format (aspect ratio)
depending on the format of received signal (p. 25).
[FULL / 4:3 / JUST / ZOOM / H-FILL]
– [HD size]: Selects the scanning area with High-
definition signal. [Size 1 / Size 2]
• [Size 1]: Scanning 95 % (select [Size 1] if noise is
generated on the edges of the screen).
• [Size 2]: Scanning 100 %
• Available when the input signal is HD.
– [H size]: Adjusts the horizontal display range to
reduce noise of both side edges of an image.
[Size 1 / Size 2 ]
• Available when the input signal is SD.
• [Size 2]: Adjusts the image size according to the
aspect mode to reduce noise (p. 25).
– [Zoom adjustments]: Adjusts vertical image
position and size. [V-position / V-size]
• [V-position]: Vertical position adjustment
• [V-size]: Vertical size adjustment
• Available when aspect setting is [Zoom].
Note
Some menus/items are grayed out depending on the
input signal or condition. For example, [3:2 pulldown] will
be grayed out if the input signal is high-definition or you
are viewing photos, etc.
Sound
[Reset to defaults]
Resets all audio adjustments to factory default settings.
●
Press OK to proceed.
[Sound mode]
Sets your favorite sound mode.
[Music]
: Improves sound quality for watching music
videos, etc.
[Speech]
: Improves sound quality for watching
news, drama, etc.
[User]
: Adjusts the sounds manually by using the
equalizer.
In [Music] and [Speech] modes, you can adjust the
[Bass] and [Treble] settings, and those settings will be
stored for each mode.
When you select [User] mode, [Equalizer] is active
instead of [Bass] and [Treble].
[Bass] / [Treble]
Adjusts the level of bass/treble effect respectively.
[Equalizer]
Adjusts the frequency level to suit your favorite sound
quality
●
Available when [Sound mode] is set to [User].
●
Select the frequency and change the frequency level
by using the cursor buttons.
●
To enhance the bass sound, raise the level of the
lower frequency. To enhance the treble sound, raise
the level of the higher frequency.
●
To reset the levels of each frequency to the default
settings, select [Reset to Defaults] by using the cursor
button, and then press OK.
[Balance]
Adjusts the left / right speaker volume.
[Surround]
Enhances audio left / right response when listening to
stereo. [Off / On]
[TV speakers]
Lets you switch the TV speaker off/on when using
external speakers. [Off / On]
●
When you set to [Off], [Surround], [Bass], [Treble] and
[Balance] are not available.
[Digital audio out]
Selects the initial setting for digital audio output signal
from DIGITAL AUDIO OUT and HDMI 2 (ARC function)
terminals.
[Auto]: Dolby Digital is output as Dolby Digital
Bitstream. MPEG is output as PCM.
[PCM]: Digital output signal is fixed to PCM.
●
When the TV receives NTSC signal, the output is
PCM.
●
For Digital TV or video contents of Media Player.
[Audio input]
Selects to fit the input signal.
■
[HDMI1-2 in]
[Digital]: When sound is carried via the HDMI cable
connection.
[Analog]: When sound is not carried via the HDMI-DVI
adaptor cable connection.
19
English
Publicité
