Table des Matières
Publicité
E BLEND
Problem
The
appliance
does not
work.
1. Wash the materials clean and peel off; put it in the body.
2. Close the main machine head with the body, connect the
electricity, then all of the menu lights, and then press the
"BLEND" button to start the program.
3. This is a manual blending program, it works with pressing button
all the time, and it does not work without pressing.
Cause
There is a
connection
problem.
The motor
unit does not
fit onto the jar
properly
because
there are too
many
ingredients in
Solution
Check if the small plug is inserted
in the appliance properly and if
mains plug is inserted in the wall
socket properly. Remove the
plugs and reinsert them.
Remove some of the ingredients
and make sure not to fill the jar
beyond the 1100ml indication.
Publicité
Table des Matières
