Malfunction And Checking Measures - IDEAL AP 100 Mode D'emploi

Other |
Troubleshooting
Problem
It does not turn on
at all
I t d o e s n' t w o r k i n
Automatic mode.
It vibrates and makes
a lot of noise.
Troubleshooting
Check
▶ Is the power cord securely attached to the
socket on the back of the unit?
Check both ends of the power cord to make
sure it is plugged in and the power connections
are secure.
▶ Is there a power outage?
Check to see if other lights and electrical
equipment are working and try again.
▶ Is the power cord securely attached to the
socket on the back of the unit?
Try turning it on again after detaching and
reattaching the power cord.
▶ Has Automatic mode been selected?
Press the Mode button until Automatic mode is
selected.
▶ Is the sensor blocked or clogged?
Clear the sensor using a vacuum cleaner.
▶ Is it running on a slanted surface?
Move the unit to a hard, flat area of the floor.
- 73 -
/ Measures