Auto Mode; Set Fan Speed (Manual Mode) - IDEAL AP 100 Mode D'emploi

AP 100

2. Auto Mode

Runs automatically by detecting indoor air contamination level.
Select "Auto".
x The product will run with " PlasmaWave® " displayed.
x The fan speed will be adjusted automatically depending on indoor
air contamination level and PlasmaWave® will run to remove harmful
substances from the air.
▶ Once the indoor air is cleaned, the wind speed will be set to
▶ The electric noise that emanates during operation is the
3. Fan speed setup (manual mode)
Runs automatically by detecting indoor air contamination level.
Select "Menu".
①
Select "Fan speed setup" and select the desired "Fan speed".
②
run continuously as "low".
normal sound produced by PlasmaWave and does not signify
a malfunction.
g
How to Use
- 60 -
| Operation