How To Clean Pre-Filter - IDEAL AP 100 Mode D'emploi

AP 100

2. How to Clean Pre-Filter

The filter cleaning time may differ depending on the surrounding contamination
levels.
Clean using a vacuum cleaner or a soft brush, and use a neutral
detergent to clean if it is heavily contaminated.
x With the exception of water, do not clean using volatile substances,
alcohol, acetone, etc.
x Cleaning around 2 times per month will allow you to use a filter semi-
permanently.
X Make sure to unplug and allow the product to cool down
X Do not use benzene, alcohol, or other volatile detergents as
X The pre-filter can be cleaned and reused.
X Do not use volatile liquids such as water that is hotter than
X Filters must be replaced if the contamination is severe to the
X Filters must be dried completely in a place where air flows
completely before cleaning.
they may cause damage or discoloration.
40°C or thinners.
point that cleaning is not possible.
well because filters that are not dried completely can result in
them giving off a bad smell.
Operating the air cleaner
- 70 -
| Operation