How To Clean Fine Dust Sensor - IDEAL AP 100 Mode D'emploi

Operation |

3. How to Clean Fine Dust Sensor

The dust sensor detects the contamination level of dust, so it is recommended to
clean the sensor once every two months for the air purifier to function optimally.
Please clean the sensor more often if the product is used in a location where there
is a greater amount of dust.
Open the dust sensor cover.
①
Clean the dust sensor lens and the
②
inlet with a damp cotton swab.
With the exception of water, do not clean
x
the sensor area with volatile substances,
alcohol, acetone, etc.
Wipe the moisture off with a dry
③
cotton swab.
Close the dust sensor cover.
④
x The dust sensor cover can be cleaned
with a vacuum cleaner.
Operating the air cleaner
- 71 -
Lens
Cotton
swab