ALFRA AP 600 Mode D'emploi page 24

TECHNICAL DATA IZ16E
Indicator IZ16E
LCD display
Units of measurement
Viewing angle
Keyboard
Measuring principle
Measuring principle
Supply voltage
Current consumption with measuring
system
Battery life
Operating temperature
Storage temperature
Air humidity
Traversing speed
Casing
Housing dimensions
Installation depth
Front panel cut-out
Protection class front
Protection class rear
The following battery holder configurations are possible:
1x battery type C or type D (1.5 V)
2x battery type AA/C/D in parallel (1.5 V)
2x battery type AA/C/D in series (3.0 V)
Pin assignment of the connector:
PIN FUNCTION
1 0V/GND
2 +1.5 V/+3.0 V/+24 V*
(* Only on request)
24
7 counter decades (digit height 14 mm)
with sign, battery status and units of measurement
mm, m, inch or °
12 o'clock
Foil with short-stroke keys
magnetic, quasi-absolute
linear or rotary
1.5 V or 3.0 V (+24 V on request)
< 1 mA at 1.5 V
1...3 years (depending on battery type)
0°C ... + 50°C
-10°C ... +60°C
max. 80%, non-condensing
max. 4 m/s
Standard housing, ABS plastic, black
W x H = 96 x 72 mm
30 mm -> depending on version
60 mm -> at client's discretion
W x H = 93 x 67 mm
IP 54 (when installed with seal)
IP 43 (when installed without seal)
IP 50 (at client's discretion)
IP 64 (at client's discretion)
IP 40
IP 50 (at client's discretion)
IP 64 (at client's discretion)