Publicité
Les langues disponibles
Les langues disponibles
EN
PURPOSE
AP-600:
The press is used for punching sheet metal. Punching without pre-drilling.
Ideal for control cabinet and switchgear construction.
Hydraulic punching press for quick punching of round, square, rectangular or special shapes in sheet
metal and control cabinet doors up to 2200 x 1000 mm and up to 30 mm folding height.
Punching up to the edge area is possible.
Simple, quick tool change even with the door in place.
Stop system can be moved in X and Y direction.
TECHNICAL SPECIFICATIONS
Outreach with stop
Punching force F
Punching stroke
Motor performance
Equivalent continuous sound pressure level
Total height
Weight approx.
Total height
Working height
Width of the punching body
Depth of punching body
Length of fence rail
Total travel of fence rail
Space requirement approx.
Maximum sheet metal and cabinet doors
Length/width
Folding
Punching performance
Round holes from
Square to
Special shapes up to
a max. Side length of
Machinable material thicknesses: (depending on tool)
Steel sheets F = 370 N/mm
Stainless steel F = 600 N/mm
Aluminium F 22 to
Punchable plastics up to
Special materials or special alloys on request!
18
600 mm
60 kN at 165 bar
66 mm
0.75 kW
72 dB
400 V
360 kg
1680 mm
1200 mm
310 mm
1300 mm
1500 mm
1000 mm
2000 x 3000 mm
2200 mm/1000 mm
30 mm
Ø 3.2 to 70.0 mm
68.0 x 68.0 mm
68.0 mm
to
3.0 mm
2
up to
2.0 mm
2
4.0 mm
4.0 mm
Publicité
