LEONARDO LIBRETTO 105X80 INGLESE:Layout 1
4 - ON SURFACE AFTER DIVING
DATA DISPLAY AND MANAGEMENT
This chapter deals with all the "on surface" functi-
ons, including data processing after a dive with
DIVE AIR, DIVE NITROX or GAGE function. By
repeatedly pressing the button, it is possible to
activate the following functions: LOGBOOK
(dive log), HISTORY (dive history) and PCLINK
(Data transfer to PC by means of interface).
SURFACE INTERVAL.
After a dive with DIVE AIR or DIVE NITROX,
when you reach depths above 4 ft., the display
provides the following information:
1) Surface interval given in hours and minutes
(SURF .T)
2) Desaturation time (DESAT) to be respected
before embarking on a flight (in hours and
minutes).
All manuals and user guides at all-guides.com
(im. 26)
7-06-2011
2) NO FLY icon. It means that flights or travel
to higher altitudes than the current altitude
must be avoided, until the icon disappears.
3) Max depth reached in the latest dive.
4) Duration of the latest dive.
5) Alarms (if any) issued during dive (ascent
rate, partial pressure of the oxygen)
6) Indication of the altitude (if applicable).
7) DECO indication (if applicable).
8) Nitrox indication and O2 toxicity bar if the
latest dive has used Nitrox
WARNING: Following the indications
of the major organizations which study di-
ving and hyperbaric medicine, Leonardo ap-
plies the no flight times as follows: 12 hours
after a single dive without decompression.
24 hours after a dive with decompression
or after repetitive or multiday, if correctly
performed.
10:11
P
59