Cressi Leonardo Manuel D'instructions page 115

LEONARDO LIBRETTO 105X80 INGLESE:Layout 1
TIME SET MODE
Date and time adjustment.
Press the button up to the TIME SET mode.
Press and hold the button to enter the mode.
The digits of the year start flashing, press again
to set month, day and 12/24 hours settings. Go
to the desired setting. Press and hold again.
The display shows just the highlighted item,
flashing. Change it by pressing again the but-
ton. Once the desired setting is reached, wait
for a few seconds. The computer automatically
changes the settings, issuing a sound signal.
Then it automatically returns to the main
screen.
NOTE: To store exact information in the
computer logbook, remember to check for
correct time and date settings.
All manuals and user guides at all-guides.com
SYSTEM MODE
Units of measure setting
(im. 11)
The Leonardo computer can make computati-
ons by metric units (depth in meters and tem-
perature in °C), or in feet and temperature in
°F. To change the unit of measurement, press
the button up to the SYSTEM mode, then
press and hold to enter the mode. "s.unit" (set
unit) is displayed with the indication °C/m. or
°F/ft. Press and hold. The indications start flas-
hing. To change them, press and wait. The
computer stores the settings, issuing a sound
signal, then automatically returns to the main
screen.
7-06-2011 10:10
(im.12)
P
31