Cressi Leonardo Manuel D'instructions page 111

LEONARDO LIBRETTO 105X80 INGLESE:Layout 1
PLAN MODE: Dive planning
While on the surface, it is possible to go to the
PLAN function in order to visualize, depen-
ding on the mixture used (Nitrox or air) the
remaining time available at different depths,
without having to make decompression stops
(safety curve). The values are given both for
the first of a (possible) series of dives and du-
ring the surface interval between two or more
subsequent dives; in such case, Leonardo takes
into account the residual nitrogen, therefore
reducing the times in the safety curve. To ac-
cess the PLAN MODE, once the computer is
on, press the button until PLAN is displayed.
Pressing and holding the button it is possible
to access the function. The screen displays a
safety curve (no decompression times) related
to the different depths between 30 ft. and 157
All manuals and user guides at all-guides.com
ft, with manual steps of 10 ft., achieved by
(im. 9)
pressing the button. Wait for a few seconds to
return to the main screen.
GAGE MODE: Depth gauge and timer
(im. 10)
The computer is provided with a third pro-
gram called GAGE (depth gauge and timer)
that may be used for both apnea (free divers)
divers and for the use in technical dives. In this
case, the instrument provides just the dive
basic parameters, i.e. depth and dive time. It
does not make tissue saturation and de-satu-
ration computation, which must be program-
med and computed by means of proper
software and/or tables. Cressi reminds you
7-06-2011
NOTE: the PLAN function will be switched
off if the computer shows Error.
10:10 P
27