Cressi Leonardo Manuel D'instructions page 105

LEONARDO LIBRETTO 105X80 INGLESE:Layout 1
NOTE: by varying the PO2 set, the com-
puter indicates the maximum depth which
may be reached with that mixture.
It is possible to change the setting of the Nitrox
mixture also during the surface interval (with
desaturation in progress), but only after 2 mi-
nutes from the start of the interval.
This is a very important feature, especially for
divers who perform a series of subsequent
dives (for instance trainers), which enables to
change one's mixture after having dived, for in-
stance, once with air, without having to wait
for complete desaturation.
WARNING: Once the percentage of
oxygen FO2 has been set, it remains stored
in the computer until it is changed again.
All manuals and user guides at all-guides.com
7-06-2011
DANGER: Leonardo always keeps
the latest oxygen setting set. It is very
important for diver's safety to always
check this parameter before each dive.
DANGER: If you dive again after a
Nitrox dive, it is fundamental for one's
safety to check for the type of mixture
contained in the cylinder, setting the
Fo2 of the computer according to that
mixture.
DANGER: Do not dive with cylinders
containing nitrox mixtures whose per-
centage of oxygen has not been perso-
nally checked.
10:10 P
21