Parkside Performance PPHSA 40-Li B2 Traduction Des Instructions D'origine page 37

Swipe­from­left­to­right­to­reach­the­smart
battery­overview­page.
-­ Lock battery
-­ Battery working mode
-­ PUSH notifi cations (overtemperature and
battery identifi er)
-­ Degrees Fahrenheit/Degrees Celsius
switchover
-­ Information
-­ Statistics
Display in real time as graphs:
-­ Capacity
-­ Discharge current
-­ Charging current
-­ Temperature
­-­Settings
•
You­will­fi ­ nd­the­ ­at­the­top­right­after­you­
have selected the battery.
Press the icon again and you can
assign a new image to the battery under
"Symbol",­you­can­rename­the­battery­un-
der­"Name"­or­give­it­a­"location".
You­can­also­access­"Device info" from this
menu.
Under­"Enable device",­you­can­authorise­
another user from the same household to
use­the­battery­via­the­Lidl­Home­app.­
You­can­also­fi ­ nd­the­frequently­asked­
questions­here­under­"FAQ".­In­this­menu,­
you­can­check­whether­the­fi ­ rmware­needs­
to­be­upgraded­and­also­perform­the­up-
grade­via­"Check for fi rmware upgrade".
The battery can also be removed under
"Remove device".­See­also­chapter­„Dis-
connecting the device and deleting data
from­the­app".
Privacy policy
The­complete­privacy­policy­can­be­found­
­"My Area"­in­the­fi ­ eld­
under the tab
"Privacy Policy".
Disconnecting the device and
deleting data from the app
1.­In­the­ ­"Home" tab, select the device
you want to remove and whose data
you want to delete.
­icon­in­the­top­right.
2. Select the
3.­Select­"Remove device".
4.­To­delete­the­data,­select­"Disconnect
and delete data".
If­you­just­want­to­disconnect­the­device­
without­deleting­the­data,­select­"Dis-
connect".
Problems with the app? -
FAQ
1.­Select­the­battery­you­are­using­the­Per-
formance device with from the device
list.
­icon­in­the­top­right.
2. Select the
3.­Under­"Other"­select­the­option­"FAQ"
(Frequently Asked Questions).
Cleaning and
Maintenance
­ Repair­and­servicing­work­not­
described in this manual should
always be carried by our Service
Centre.­Use­only­original­parts.
­ Turn­off­the­appliance­and,­before­
doing any servicing, remove the
battery.
Wear gloves when handling the
safety­knife­bar.­This­will­protect­
you against cuts.
The following cleaning and servicing
should be done regularly. This will ensure
a long and reliable service life.
GB MT
37