Philips Wet&Dry S9041/12 Mode D'emploi page 28

28
English
Cleaning the shaver under the tap
4 Unpack the new cleaning cartridge and pull off
the seal.
5 Place the cleaning cartridge in the SmartClean
system.
6 While holding the SmartClean system with one
hand, gently push the top part of the
SmartClean system back down ('click').
Clean the shaver after every shave for optimal
performance.
Be careful with hot water. Always check if the
water is not too hot, to prevent burning your
hands.
Never dry the shaving unit with a towel or tissue,
as this may damage the shaving heads.
1 Switch on the shaver.
2 Rinse the shaving unit under a warm tap.