Philips Wet&Dry S9041/12 Mode D'emploi page 25

2
1
Using the SmartClean system
3 Press the button on the side of the SmartClean
system (1) and lift the top part of the
SmartClean system (2).
4 Pull the seal off the cleaning cartridge.
5 Place the cleaning cartridge in the SmartClean
system.
6 While holding the SmartClean system with one
hand, gently push the top part of the
SmartClean system back down ('click').
Caution: Always shake excess water off the
shaver before you place it in the SmartClean
system.
25
English