Publicité
Les langues disponibles
Les langues disponibles
Keep your fingers away from
„
the trigger when you are not
using this device and switch
from a working position to
another position.
Before starting work each
„
time, check that the safety and
trigger devices are working
properly and that the screws
and nuts are all tight.
Do not carry out any altera-
„
tions to the device.
Do not dismantle or block any
„
parts of the fastening device,
such as, for example, a trigger
safety catch.
Do not carry out any
„
"Emergency repairs" using
inappropriate tools/methods.
The fastening device must be
„
maintained regularly and prop-
erly, in accordance with the
manufacturer's specifications.
Avoid any type of weakening
„
or damage to the device, for
example, through:
Stamping or engraving,
„
Modification measures which
„
are not permitted by the
manufacturer,
Guiding using templates which
„
are made out of hard material,
e.g. steel,
Dropping on the floor or
„
pushing across the floor,
Using it as a hammer,
„
any type of blunt impact.
„
Keep your fingers away from
„
the trigger when you are not
using this device and switch
from a working position to
another position.
Keep body parts such as hands,
„
legs, etc. away from the direc-
tion of firing and make sure that
the fastener cannot penetrate in
any parts of the body.
When you use the device,
„
please be aware that the
fastener could ricochet and
cause injuries.
Hold the device with a firm
„
grip and prepare yourself for
recoil.
Do not use a device which is
„
damaged.
Be careful when handling
„
fasteners, particularly when
loading and unloading, as the
fasteners have sharp points
which could cause injuries.
Before use, always inspect the
„
device for defects, parts which
are not corrected properly or
worn parts.
Do not lean too far forward.
„
Only use in safe work stations.
Always make sure your footing
is secure and maintain your
GB/IE/NI/CY/MT
11
Publicité
