Hikmicro HM-TD3028T-2/Q Guide De Démarrage Rapide page 11

attack, however, our company will provide timely
technical support if required.
● Please enforce the protection for the personal
information and the data security as the device
may be confronted with the network security
problems when it is connected to the Internet.
Please contact us when the device might exist
network security risks.
● Please understand that you have the responsibility
to configure all the passwords and other security
settings about the device, and keep your user
name and password.
Maintenance
● If the product does not work properly, please
contact your dealer or the nearest service center.
We shall not assume any responsibility for
problems caused by unauthorized repair or
maintenance.
● A few device components (e.g., electrolytic
capacitor) require regular replacement. The
average lifespan varies, so periodic checking is
recommended. Contact your dealer for details.
● Wipe the device gently with a clean cloth and a
small quantity of ethanol, if necessary.
● If the equipment is used in a manner not specified
by the manufacturer, the protection provided by
the device may be impaired.
● The serial port of the equipment is used for
debugging only.
Using Environment
● Make sure the running environment meets the
requirement of the device. The operating
temperature shall be -40°C to 70°C (-40°F to
158°F), and the operating humidity shall be 95% or
less, no condensing.
1. Einleitung
Die Wärmebild-Cube-Kamera kann die Temperatur mit hoher
Genauigkeit in Echtzeit messen. Sie wird häufig in elektrischen
Anlagen und der Industrieautomation zur Brandverhü tung
eingesetzt. Das Voralarm- und Netzwerksystem unterstü tzt Sie
dabei, unerwartete Ereignisse unverzü glich zu entdecken und Ihr
Eigentum effektiv zu schü tzen.
2. Erscheinungsbild (Seite 1 – A)
Komponente und Schnittstelle
Nr. Komponente
● DO NOT expose the device to high
electromagnetic radiation or dusty environments.
Refer to the specification for detailed information.
● DO NOT aim the lens at the sun or any other bright
light.
● The equipment shall not be exposed to dripping or
splashing and that no objects filled with liquids,
such as vases, shall be placed on the equipment.
● No naked flame sources, such as lighted candles,
should be placed on the equipment.
● Burned fingers when handling the parts with this
symbol . Wait one-half hour after switching off
before handling the parts.
Emergency
● If smoke, odor, or noise arises from the device,
immediately turn off the power, unplug the power
cable, and contact the service center.
Manufacture Address
Room 313, Unit B, Building 2,
399 Danfeng Road, Xixing Subdistrict, Binjiang
District, Hangzhou, Zhejiang 310052, China
Hangzhou Microimage Software Co., Ltd.
COMPLIANCE NOTICE: The thermal series products
might be subject to export controls in various
countries or regions, including without limitation, the
United States, European Union, United Kingdom
and/or other member countries of the Wassenaar
Arrangement. Please consult your professional legal
or compliance expert or local government authorities
for any necessary export license requirements if you
intend to transfer, export, re-export the thermal
series products between different countries.
Beschreibung
9
Deutsch