Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION INSTRUCTIONS
DIMENSIONS
This appliance is 42 inches (106.7 cm) wide, 16 inches (40.6 cm) high and 21 inches (53.2 cm) deep.
WALL SLEEVE
All wall sleeves used to install the air conditioner must be in good structural condition and have a rear
grille that securely attaches to the sleeve or the flange of the sleeve to secure the appliance.
Install the wall sleeve according to the wall sleeve installation instructions. When installing the sleeve make
certain there is nothing within 20 inches (51 cm) of the front or back of the appliance that would interfere
with heat radiation and exhaust air flow.
Required for new installation: PTAC Sleeve DPSL120B1W - sleeve sold separately.
INSTALLATION POSITIONING
Please see the image below for all measurements required to provide the proper installation of the
appliance.
• Angle of drop from front to back of appliance is approximately 3°to 4° in order to allow for proper
drainage
• Front of appliance must be over 12.2 - 16cm (4-13/16 - 6-5/15 inches) above the floor
Note: Ensure there is no barrier (including but not limited to bushes, trees, decorative items) blocking the
air outlet at the rear of the appliance.
11
Publicité
