5 - INTENDED USE OF THE MACHINE
The hose reels of the painted series are suitable for distributing compressed air for profes-
sional use.
All the hose reels have to be used only for distributing fluids, at the pressures and
temperatures indicated on the technical manual.
Every hose reel code is corresponding to a different kind of fluid. It is forbidden to use the
machine for any other kind of fluid.
We decline any responsibility for anomalies or dangers which could arise by a hose assem-
bly with characteristics and uses different from the ones described herein. Avoid to get on
the machine or to lay any kind of material on it. Check periodically the correct operation of
the hose reel, and control that the couplers are well locked and there are no fluid losses.
Close the feeding of fluid at the shift end to avoid damages during non-working hours.
Use of the hose reel is not permitted in potential explosive environments (ATEX).
6 - MARKING AND IDENTIFICATION
features
model
serial number
QR-code for manual
7 - MOUNTING OF THE HOSE (Models without hose)
The hose reels without hose are supplied with the unloaded spring.
Use a hose with dimension and pressure characteristics suitable for use according to the
hose reel model (see technical manual).
7.1
7.2
7.3
We affix the CE and UKCA marking as the manufac-
turer of this equipment. On the equipment is securely
attached a tag with curing adhesive system on which
are indicated in addition to the name of the manufactu-
rer and the symbols "CE" and "UKCA", all information
necessary for good identification of the machine (mo-
del, duty, serial number, weight, etc.).
7.1 Insert a 5 mm hexagonal wrench into the axle of the spring lin-
kage shaft. Unfasten the nut with a 19 mm wrench, holding in
place with the hexagonal wrench.
7.2 Put the hose and connect it to the shaft of the drum and tighten
by the suitable wrench.
7.3 Rotate manually the drum in order to rewind completely the hose.
WARNING: DO NOT TURN IN THE OPPOSITE DIRECTION!
- 9 -