Publicité
Les langues disponibles
Les langues disponibles
This manual is giving information about a correct assembly, use and maintenance of the
hose reels in order to prevent accidents.
The hose reel has been designed in conformity to the present EEC rules and UK standards
and namely:
- UNI EN ISO 12100:2010 and BS EN ISO 12100:2010 Safety of machinery - General
principles for design - Risk assessment and risk reduction (ISO 12100:2010);
- UNI EN ISO 13857:2020 and BS EN ISO 13857:2019 Safety of machinery - Safety distan-
ces to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2019).
The equipment must be used in accordance with the instructions contained in this manual
and it is guaranteed for a period of 18 months from date of manufacture. Warranty does not
cover flexible hoses, seals, all wear parts and all parts which are faulty after incorrect use,
incorrect installation or maintenance, maintenance carried out by unauthorized personnel,
transport damages, or for circumstances not concerning manufacturing defects. The manu-
facturer disclaims any responsibility for any damage, that may directly or indirectly, derive
to persons or property in consequence to the not observed requirements specified in this
instruction manual and especially the warnings regarding installation, use and maintenance.
The hose reels models ANR - ANRS - ADR - ADRS are made of hot galvanized moulded
steel and painted with electrostatic polyester powder system in order to guarantee a long life
of the product.
The hose rolling is done automatically by a spring made of high quality iron, incorporated in
the drum. The stop can be done at any desired length, through an automatic locking device.
Models ANRS - ADRS are equipped with "SAFE REWIND" system which allows hose slowed
rewinding.
The incorporated revolving support allows the orientation of the hose reels in order to guide
its direction
.
The automatic device stopping the hose works on an area corresponding to 1/2 turn of the
drum. To release the hose, put a light traction on it.
It is important always to keep the hose back when you rewind it, in order to
avoid damages to the machine, injuries to people or to surrounding things.
ENGLISH - Translated from Italian
1 - GENERAL RULES APPLIED
2 - WARRANTY
3 - DESCRIPTION
4 - OPERATION
- 8 -
Publicité
