OHAUS Frontier FC5917RF Manuel D'instructions page 13

EN-4
2. INSTALLATION
2.1 Unpacking
Carefully remove your centrifuge and each of its components from the package. The included components vary
depending on the centrifuge model (see table below). Save the packaging to ensure safe storage and transport.
The instruction manual must always be kept with the centrifuge!
Rotor(s) / Accessories will be packed separately.
WARNING: Lifting Hazard. Single person lift could cause injury. Use a mechanical lifting
device or team lifting procedures when lifting or moving the equipment.
Please refer to section 8.3 for details about lifting the equipment out of the packaging.
2.1.1 Delivery package
Quantity
2.1.2 Unpacking of FC5917RF/FC5917RF Short
Model FC5917RF/FC5917RF Short are supplied in a carton on a wooden pallet.
•
Remove the strap retainer and open the carton. Remove the metal bars which are fixed onto the pallet
to secure the centrifuge.
•
Remove the metal bars and fix them to the front edge of the pallet so that they can be used as a ramp (see
Figure 9). Use the same screws and pay attention to secure screw connection.
•
Take the provided open-ended spanner to move the centrifuge feet up until it is on its rollers (see
also figure 9).
•
Move the centrifuge carefully from the pallet, preferably with several people. Move the centrifuge on its intended
location. The instruction manual must be kept with the centrifuge at all times!
Centrifuge FC5714, FC5718, FC5718R, FC5720R, FC5816,
1
FC5816R, FC5830R, FC5916, FC5916R, FC5917RF, FC5917RF
1
1
1
1
Description
Short
Power Cable
Warranty Card
Instruction Manual/Quick Guide
Rotor Key
Figure.9
TM
Frontier Centrifuges