Publicité
Les langues disponibles
Les langues disponibles
Troubleshooting
8.4
Error codes and flashing sequences
Flashing code
Short orange flashes
1x long steady green light Transmission confirmed
1x long red flash
Short orange flashes
(every 10 s)
Fast orange flashing
Brief steady orange light
(after green or red confir-
mation)
Alternating long and short
orange flashing
6x long red flashes
1x orange, 1x green light-
ing (after inserting batter-
ies)
Meaning
Radio transmission/send
attempt/data transmission
Transmission failed or
duty cycle limit reached
Pairing mode active
Direct pairing mode active
Batteries empty
Device software updating
(OTAU)
Device defective
Test display
Solution
Wait until the transmis-
sion is completed.
You can continue opera-
tion.
Please try again
(see „8.2
Command not confirmed"
on page 26)
or
(see
„8.3 Duty cycle" on page
26).
Please enter the last four
numbers of the device
serial number for confir-
mation
(see „6.1 Pairing"
on page
20).
Enable the pairing mode
of the device you would
like to add
(see „6.1.1
Direct pairing with a
Homematic IP device" on
page
20).
Replace the batteries
„7 Changing the batteries"
on page
25).
Wait until the update is
completed.
Please see your app for
error message or contact
your retailer.
You can continue once
the test display has
stopped.
(see
27
Publicité
