Le Chai LM78/1 Notice D'utilisation page 156

LB720V/1 and LBN720V/1
1. Remove the glass door by unscrewing the eight locking screws (5) and (6). Be sure to hold the glass
door firmly after removing the screws and place it on a padded surface to avoid possible damage.
2. Loosen the screws (1) and (3) then transfer the door bracket (2) and the decorative cover (4) to the
opposite side.
3. Rotate the glass door 180º and replace the glass door on the opposite side. Then screw and tighten
it once the door is leveled.
LBN240POV/1, LBN240POVP/1, LBN460POV/1, LBN460POVP/1, LBN458PO/1, LBN458POP/1
LBN200POV and LBN200POVP
1. Remove the cover cap (3) and then remove the glass door by unscrewing the four screws (1) and
(2). Be careful to hold the glass door firmly after removing the screws and place it on a padded
surface to avoid the risk of damage.
2. Pop out the cover caps on the left side of cabinet and use them to cover the screw holes on the right
hand side.
3. Rotate the glass door 180º and refit the glass door to the opposite side. Then screw and tighten it
after the door is leveled.
1
3
4
1 2 5
1 3
2
6 6
5 2
1
2
3
4
1
2
3
EN-156