Le Chai LM78/1 Notice D'utilisation page 155

LB160/1, LBN160/1 and LBN300
1. Remove the bottom hinge (1) by unscrewing the four lock screws (2). Be careful to hold the glass
door firmly after removing the screws. (Fig. 1)
2. Gently pull down to remove the glass door from the right top hinge and place it on a padded surface
to avoid the risk of damage. Then remove the right top hinge (4). (Fig. 3)
3. Unscrew and transfer the hinge pin (3) of the bottom hinge to the opposite side. (Fig. 2)
4. Pop out the cover caps on the left side of cabinet and use them to cover the screw holes on the right
hand side.
5. Screw the alternative left top hinge (6), included in the fittings, on the left hand side of cabinet. (Fig. 3)
6. Rotate the door 180º and relocate the door to the designated position. Then screw the bottom hinge
assembly on the left designated position and tighten it after the door is leveled.
LB340/1 and LBN340/1
1. Remove the glass door by unscrewing the eight lock screws 3 and 4. Be careful to hold the glass
door firmly after removing the screws and place it on a padded surface to avoid the risk of damage.
2. Unscrew and transfer the door supporter 2 to the opposite side.
3. Rotate the glass door 180º and refit the glass door to the opposite side. Then screw and tighten it
after the door is leveled.
EN-155