Le Chai LM78/1 Notice D'utilisation page 151

DOOR ALARM
If the door has been left open for more than 60 seconds, the audible alarm will sound. Closing the door
or pressing the POWER key once can switch off the audible alarm.
INTERIOR LIGHT / TriColor
The interior light makes it easy to view your wine labels and enhances the display of your collection.
Touching and holding the LIGHT mark for 5 seconds toggles between 2 modes of operation for the
internal lights: functional (default) mode and showcase mode. If you are in functional (default) mode,
the lights will turn on only when the door is open. If you are in showcase mode, the lights will be on
whether or not the door is open. The unit is equipped with a LED light fitting system. To change the
LED light fitting pls contact the service department.
NOTE: Please use only the original LED light fittings provided by the manufacturer.
Select the color of the interior lighting orange, white and blue by touching the LIGHT key. Touch the LIGHT
key to switch between single color mode and dynamic color mode. In dynamic color mode, the interior
lighting will start to cycle through the 3 available colors. Touching the LIGHT key once when the desired
color is on, your interior light will be changed to that color. To return to dynamic color mode, touch the
LIGHT key again.
DYNAMIC COOLING / SILENT MODE
The appliance has two different running modes. In Silent mode
reached, the appliance will run without the fan. In Dynamic Cooling mode the fan cycles on and off to
circulate the air even after the required temperature is reached. This ensures consistent humidity and
temperature distribution in the wine cellar, creating perfect conditions for long term storage.
Using the dynamic mode increases the level of noise in operation
Note

•
If the unit is unplugged, power lost, or turned off, you must wait 3 to 5 minutes before restarting the
unit. If you attempt to restart before this time delay, the Wine cooler will not start.
• When you use the Wine cooler for the first time or restart the Wine cooler after having been shut
off for a long time, there could be a few degrees variance between the temperature you select and
the one indicated on the LED readout. This is normal and it is due to the length of the activation
time. Once the Wine cooler is running for a few hours everything will be back to normal.
once the required temperature is
EN-151