Starting up the device
Once the wine cabinet is properly installed, we advise that you clean the inside using warm water with a
low concentration of dish washing liquid. Do not use abrasives or scouring powder; they may scratch
the surface finish.
USAGE
CAUTION! Wine cabinets are intended only for storing and preserving wine.
IMPORTANT: Your wine cabinet is ideally suitable for holding Bordeaux type bottles of 0.75 L capacity. It
can contain larger bottles; however care must be taken that they do not prevent the door from closing
properly.
-
When closing the door ensure that it does not touch any of the bottles.
-
If you load several bottles at a time, it will take longer before the cabinet reaches the desired
temperature.
-
In order to avoid damaging the door seal, ensure that the door is fully open before moving the racks
along the compartment rails.
Adjusting the temperature
1
Dual zone control panel
1
1. ON/OFF button
2. ºC/ºF selector
3. Light button
4. LCD screen
USAGE
2
3
4
2
3
6
5
6
4
5
5. Temperature display
6. and 7. Temperature setting
8. Setting selector
7
8
7
8
EN-147