Le Chai LM78/1 Notice D'utilisation page 154

LM78/1 and LMN78/1
1. Unscrew the lock screw (1) then gently lift and slide the door outward the right to release it. Be careful
to hold the door firmly after removing the screw. (Fig. 1)
2. Gently pull down to remove the door from the right top hinge and place it on a padded surface to
avoid the risk of damage. Transfer the door pin (2) to the opposite of door. (Fig. 2)
3. Remove the right bottom hinge (4) and the right top hinge (5). (Fig. 2 & 3)
4. Pop out the cover caps on the left side of cabinet and use them to cover the screw holes on the right
side.
5. Screw the alternative left top hinge, included in the fittings, on the left side of cabinet.
6. Screw the alternative left bottom hinge (6), included in the fittings, on the left side of cabinet.
7. Rotate the door 180º and relocate the door to the designated position. Lift and slide the door inward
from the left and secure the door pin (2) with lock screw (1). (Fig. 4)
8. Recheck and adjust the door alignment by loosening the lock screw (1) and moving the door. Tighten
the screw (1) after the door is levelled. (Fig. 4)
1
2
3
1
3
5
6
1
2
4
4
EN-154