Publicité
Les langues disponibles
Les langues disponibles
3. Use a small flat head screwdriver to lift and remove the plastic cap on the upper
center (locking hole) of the door and insert it into the lower center hole, rotate the door
180 degrees (counterclockwise) so that the top becomes the bottom.
4. Unscrew the upper and lower hinge.
5. Dislodge the plastic caps on the left side of the cabinet and change them to the right
side.
6. Install on the opposite side the left hinges included as accessories with the instruction
manual.
7. Screw the metal pin under the door, then install the door by retracting it into the upper
hinge and then into the lower hinge. Replace the screws of the support bar at the bottom
to secure the door.
9
Publicité
