Publicité
Les langues disponibles
Les langues disponibles
Bottle layout and storage
Your wine cabinet has been designed to safely store a maximum number of
bottles. We recommend that you follow the tips below to optimize loading.
• Remove the tape from the shelves once the appliance is stable and ready for storage.
• Place the bottles evenly to avoid concentrating the weight in one place. Bottles should
not touch the back of the wine cabinet. Your wine cabinet has been designed to store large
bottles such as Pinot Noir and Champagne. These larger bottles reduce the number of
bottles you can place on a shelf. Make sure that not all bottles are grouped together at the
top or bottom of the wine cabinet for optimal cooling.
• Pull out only one telescopic shelf at a time. Never try to pull more than one telescopic
shelf at a time.
4. Move the lower hinge (10) to the
opposite side and re-insert all screws
(3c) and (8). The lower hinge cover (12)
must fold over the lower hinge (10).
5. Place the washer (11) on the metal hinge pin (9) and
replace the door on the bottom hinge by aligning the
metal hinge pin (9) with the outer hinge hole on the
bottom hinge (10).
6. Replace the upper hinge (4) with the screws (3a).
Insert the locking cap (6), screws (7) and (8) and
attach the hinge cap (2). Replace the hinge cover (1)
and the lower hinge cover (12).
11
Publicité
