Ryobi RRS12011L Traduction Des Instructions Originales page 4

KNOW YOUR PRODUCT
See page 61.
1. Blade
2. Shoe assembly
3. Toolless blade change system
4. LED Indicator (Fuel gauge)
5. Unlock button
6. Switch trigger
7. Battery port
MAINTENANCE
■ When servicing, use only identical Ryobi replacement
parts. Use of any other parts may create a hazard or
cause product damage.
■ Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types
of commercial solvents and may be damaged by their
use. Use clean cloths to remove dirt, dust, oil, grease,
etc.
■ Do not attempt to modify this tool or create accessories
not recommended for use with this tool.
WARNING
Do not use compressed air to blow dust from the product.
This practice is dangerous and can cause dirt and grit to
be blasted into someone's eyes, causing injury.
ENVIRONMENTAL PROTECTION
Recycle raw materials instead of disposing
of as waste. The machine, accessories
and packaging
environmental-friendly recycling.
LED INDICATOR
Battery charge
66% - 100%
33% - 66%
< 33%
NOTE: If only the red LED indicator is illuminated, it
means the battery power is low. The battery needs to be
recharged.
BATTERY OVERLOAD PROTECTION
This tool is designed to protect the battery from overloading.
When overloading is detected, the tool will automatically
switch off. To resume operation, switch the tool off and
on again. If the tool fails to operate, it means battery pack
is discharged and should be recharged in a compatible
charger.
2
should be sorted for
LED colour
Green + Yellow + Red
Yellow + Red
Red
SYMBOL
Safety alert
V Volts
Reciprocations per minute
Direct current
CE conformity
EurAsian Conformity Mark
Ukrainian mark of conformity
Please read the instructions carefully
before starting the machine.
Wear ear protection
Wear eye protection
Recycle
Waste electrical products should not
be disposed of with household waste.
Please recycle where facilities exist.
Check with your Local Authority or
retailer for recycling advice.
English