Westfalia TSM85 Mode D'emploi page 34

Handling
 Observe the notes in the user manual for the power tool which
you are using this fitted tool with.
 Before start-up, attach the corresponding protective equipment
to the power tool. Do not perform any work without any safe-
guarding by protective equipment.
 Use personal protective equipment corresponding to the type
of machine and application, e.g. eye and face shield, ear
protection, respiratory protection, protective footwear, protec-
tive gloves and other protective clothing.
 Only perform work, which the fitted tool is suitable for. Observe
any restrictions on use, safety instructions or other information.
 Before setting the power tool down on the work bench or the
ground, switch it off and wait until the fitted tool has come to a
complete stop.
 When performing cut-off grinding, insert the fitted tool straight
into the cutting slit so that the power tool doesn't cant.
 Do not move back and forth in the material; instead steadily
pull it through the applicable material.
 Only work at a right angle and along a level axis to rule out any
risk of cracks in the core or fragments breaking off.
 Do not exert excessive pressure. The weight of the power tool
is sufficient.
 Allow for breaks to let the fitted tool cool off.
 The fitted tool will become very hot during work. Only hold it
with protective gloves after it has cooled off.
Safety Instructions for the Laser Cutting Guide
 Do not point the laser beam at persons or animals and do not
look into the laser beam. This laser emits a laser beam that
falls under laser class 2 in accordance with EN 60825-1:2014.
You could blind people with it.
 A laser is not a toy and does not belong in the hands of
children.
All manuals and user guides at all-guides.com
Safety Notes
26