Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
cutting through harmful/toxic materials such as paint coats
containing lead, some types of wood and metal and use a dust
extractor as well as personal protective equipment such as a
dust mask.
l. Always wear ear protection!
m. Hold the device by the insulated gripping surfaces as the
cutting disc could come into contact with the own mains cord.
Damaging a live line could also energise metallic parts of the
device and inflict an electric shock.
Electrical Safety
When using electric machines always observe the safety
regulations applicable in your country to reduce the risk of fire,
electric shock and personal injury. Read the following safety
instructions and also the enclosed safety instructions.
Always check that the power supply corresponds to the voltage
on the rating plate.
Class II machine – Double insulation – You do not need any
earthed plug.
Replacing cables or plugs
If the power cord is damaged, it must be replaced by the manu-
facturer or its service agent or a similarly qualified person, in
order to avoid a hazard. Immediately throw away old cables or
plugs when they have been replaced by new ones. It is danger-
ous to insert the plug of a loose cable in the wall outlet.
Using extension cables
Only use an approved extension cable suitable for the power
input of the machine. The minimum conductor size is 1.5 mm2.
When using a cable reel always unwind the reel completely.
Inadequate extension cords can be dangerous. If an extension
cord is used, it shall be suitable for outdoor use, and the connec-
tion has to be kept dry and off the ground. It is recommended that
this is accomplished by means of a cord reel which keeps the
socket at least 60 mm above the ground.
Safety Notes
23
Publicité
