Westfalia TSM85 Mode D'emploi page 32

Safety instructions for handling saw blades
 Only use fitted tools if you are able to use them in a controlled
manner.
 Observe the maximum speed. The maximum speed specified
on the fitted tool must not be exceeded. Comply with the
speed if specified.
 Do not use any fitted tools that are cracked. Dispose of any
cracked fitted tools. It is not permissible to repair them.
 Clean any dirt, oil, grease and water off of the clamping
surfaces.
 It is not permitted to use loose reducing rings or bushings to
reduce bore holes in circular saw blades.
 Make sure that fixed reducing rings for securing the fitted tool
have the same diameter and are at least ¹⁄₃ of the cutting
diameter.
 Make sure that fixed reducing rings are parallel to one another.
 Handle the fitted tools carefully. Ideally, you should store them
in the original packaging or special containers. Wear protective
gloves for better grip and to further reduce the risk of injury.
 Before using fitted tools, make sure that all protective devices
are properly secured.
Before use, make sure that the fitted tool complies with the
technical requirements of this power tool and that it is properly
secured. Only use the enclosed saw blade for cutting wood and
never use it to cut metal.
Safety instructions and usage instructions for diamond
cutting discs
Use
 Only use the cutting-off wheels for cut-off grinding and not for
rough grinding. Only use the cutting-off wheels for the speci-
fied material and not for other materials. There is a risk of
injury! Cut and then let the material cool down afterwards.
All manuals and user guides at all-guides.com
Safety Notes
24