Publicité
Les langues disponibles
Les langues disponibles
8990889
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace the
missing part before operating. Failure to do so could result in a malfunction
and personal injury.
Remove the parts and accessories from the packaging and inspect for damage.
Make sure that all items in the contents are included.
Contents:
•
Wrench
IDENTIFICATION KEY
A
Front exhaust
B
Gun body
C
Safety nose mechanism
D
Trigger
E
Handle
F
Air inlet
G
Trigger
H
Magazine release latch
I
Magazine
J
Shingle Guide
ASSEMBLY & INSTALLATION
Numbered references in parenthesis (#1) refer to the included Parts List.
Letter references in parenthesis (A) refer to the included Identification Key.
OPERATION
1.
Disconnect the tool' s air supply from
the air inlet (F) (Fig. 2). Discharge
any residual air.
2.
Place the tool down on its side with
the magazine release latch (H) facing
upwards.
3.
Hold the nail guide (#80) and push
the latch button downward towards
the tools bottom until the latch bar
slides free.
8
Coil Roofing Air Nailer
•
Safety goggles
For technical questions call 1-800-665-8685
•
Oil bottle
V1.1
Fig. 1
Fig. 1
Publicité
