Bosch 0600861A01 Notice Originale page 15

Sabre saw
Problem Possible Cause
Power tool fails to op- Battery discharged
erate
Power tool defective
Internal wiring of garden tool defective
Power tool functions On/Off switch defective
intermittently
Excessive vibrations/ Power tool defective
noise
Sawing time per bat- Blade holder area needs cleaning
tery charge too low
Saw blade worn
Poor sawing technique
Battery not fully charged
The saw blade is run- Battery is getting discharged
ning slow
Overloaded during operation
Maintenance and Service
Maintenance, Cleaning and Storage
Always follow the safety advice provided.
u
Clean the power tool and the saw blade mount regularly if
material accumulates and can hinder movement.
Clean the saw blade mount preferably with compressed air
or with a soft brush. For this, remove the saw blade from the
power tool. Ensure proper operation of the saw blade holder
by applying a suitable lubricant.
Heavy contamination of the machine can lead to malfunc-
tions. Therefore, do not saw materials that produce a lot of
dust from below or overhead.
Store the power tool in a secure, dry place, out of the reach
of children.
Do not place other objects on the power tool.
Battery Maintenance
Use the following procedures to enable optimum usage of
the battery:
– Protect the battery against moisture and water.
– Store the machine and battery only within a temperature
range between –20 °C and 50 °C . As an example, do not
leave the battery in the car in summer.
– It is recommended that the battery is not stored within
the product but stored separately.
– Do not leave the battery in the product in direct sunlight.
– The ideal storage condition for the battery is 5 °C.
– Occasionally clean the venting slots of the battery using a
soft, clean and dry brush.
A significantly reduced working period after charging indic-
ates that the battery is used and must be replaced.
Bosch Power Tools
Corrective Measure
Recharge battery; also see "Battery Charging"
Contact Service Agent.
Contact Service Agent.
Contact Service Agent.
Contact Service Agent.
Hold the tool to point to the ground and start to
operate
Change saw blade
see "Working Advice"
Recharge battery; also see "Battery Charging"
Recharge battery; also see "Battery Charging"
Reduce pressing force of tool against branch
After-Sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
You can find further service addresses at:
www.bosch-pt.com/serviceaddresses
Transport
The recommended lithium-ion batteries are subject to legis-
lation on the transport of dangerous goods. The user can
transport the batteries by road without further require-
ments.
When shipping by third parties (e.g.: by air transport or for-
warding agency), special requirements on packaging and la-
belling must be observed. For preparation of the item being
shipped, consulting an expert for hazardous material is re-
quired.
English | 15
F 016 L94 474 | (16.08.2022)