Bosch 0600861A01 Notice Originale page 13

Symbol Meaning
Switching on
Switching off
Permitted action
Prohibited action
Accessories/Spare parts
Product description and
specifications
Read all safety warnings and all instruc-
tions. Failure to follow the safety warnings and
instructions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the end of this operating
manual.
Intended use
This power tool is intended for garden and household use.
Technical Data
Sabre saw
Article number
Rated voltage A)
Stroke rate at no load n
0
Tool holder
Stroke
− in wood
− in soft metal
Weight according to EPTA‑Procedure 01:2014
Recommended ambient temperature during charging
Permitted ambient temperature during operation
Battery type
A) Limited performance at temperatures < 0 °C
B) Depends on battery in use
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Noise/Vibration Information
Noise emission values determined according to
EN 62841-2-11.
Typically the A-weighted sound pressure level of the product
is 74 dB(A). Uncertainty K = 5 dB. The noise level when
working can exceed the declared values.
Wear hearing protection!
Bosch Power Tools
It is for cutting branches and can also be used for the sawing
of wood, soft metal (such as copper) and plaster board.
It is suitable for straight and curved cuts.
The saw blade recommendations must be observed.
Product Features (see figure A)
(1) Removable hook
(2) Saw blade holder
(3) Lock for saw blade
(4) Lock for hook
(5) Battery charge-control indicator
(6) On/Off switch
(7) Lock-off button for On/Off switch
(8) Saw blade
(9) Battery
(10) Charger
(11) Handle (insulated gripping surface)
(12) Battery unlocking button
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
V
min
mm
mm
mm
B) kg
and storage
A)
Vibration total values a
determined according to EN 62841-2-11:
Sawing chipboard with saw blade S 644 D:
a = 19 m/s 2 , K = 1.5 m/s
h,B
Sawing wood beams with saw blade S 644 D:
a = 20 m/s 2
h,WB
That the declared vibration total value(s) and the declared
noise emission value(s) have been measured in accordance
a)
3 600 H61 A..
-1
°C
°C
PBA 18V...W-.
1.5 Ah, 2.0 Ah, 2.5 Ah, 3.0 Ah, 4.0 Ah,
5.0 Ah, 6.0 Ah
(triax vector sum) and uncertainty K
h
2 ,
, K = 1.5 m/s 2 .
F 016 L94 474 | (16.08.2022)
English | 13
Keo
18
0 − 2300
SDS
20
80
7
1.4
0... +35
-20... +50