Bosch 0600861A01 Notice Originale page 14

14 | English
with a standard test method any may be used for comparing
one tool to another.
That the declared vibration total value(s) and the declared
noise emission value(s) may also be used in a preliminary as-
sessment of exposure.
That the vibration and noise emissions during actual use of
the power tool can differ from the declared values depend-
ing on the ways in which the tool is used especially what kind
of workpiece is processed; and of the need to identify safety
measures to protect the operator that are based on an estim-
ation of the exposure measures in the actual conditions of
use (taking account of all parts of the operating cycle such as
the times when the tool is switched off and when it is running
idle in addition to the trigger time).
Mounting and Operation
Action
Delivery scope
Mounting the Hook
Checking if the Hook fits correctly
Inserting/Replacing the Saw Blade
Checking if the Blade is connected
Inserting/removing the battery
Switching on and off/Controlling the
Stroke Rate
Working Advice
Maintenance and cleaning
Selecting accessories
Starting Operation
Remove the battery from the power tool before carry-
u
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
moved for transport and storage. There is risk of injury
from unintentionally pressing the on/off switch.
Inserting/removing the battery (see figure F)
Note: Using unsuitable batteries can lead to malfunctions of
or cause damage to the power tool.
Insert the charged battery (9). Make sure that the battery is
fully fitted.
To remove the battery (9) from the machine, press the bat-
tery unlocking button (12) and pull the battery out.
Troubleshooting
F 016 L94 474 | (16.08.2022)
Battery charge indicator
The battery charge-control indicator (5) indicates the re-
maining battery capacity or an overload when the power tool
is switched on.
LED
Continuous lighting 3 x green
Continuous lighting 2 x green
Continuous lighting 1 x green
Slow flashing 1 x green
Operation
Switching on and off (see figure G)
Firstly, press the lock-off button (7) and then the On/Off
switch(6). You can release the lock-off button (7) when the
Figure Page
power tool is running. The lock-off button (7) engages again
A 213
as soon as the power tool comes to a complete stop.
B 214
Working Advice
C 215
D 215
Always follow the safety advice provided.
u
E 216
Selecting the saw blade
F 216
Use only saw blades suitable for the material being worked.
G − H 217
An overview of recommended saw blades can be found at
the end of these operating instructions. Do not use other
I − J 218 − 219
blades than recommended.
K 219
Use a narrow saw blade when sawing tight curves.
L 220
Dust/Chip Extraction
Dust from materials such as lead-containing coatings, some
wood types, minerals and metal can be harmful to one's
health. Touching or breathing-in the dust can cause allergic
reactions and/or lead to respiratory infections of the user or
bystanders.
Certain dust, such as oak or beech dust, is considered carci-
nogenic, especially in connection with wood-treatment ad-
ditives (chromate, wood preservative). Materials containing
asbestos may only be worked by specialists.
– Provide for good ventilation of the working place.
– It is recommended to wear a P2 filter-class respirator.
Observe the relevant regulations in your country for the ma-
terials to be worked.
Avoid dust accumulation at the workplace. Dust can
u
easily ignite.
Capacity
≥ 75 %
40 − 75 %
15 − 40 %
0 − 15 %
Bosch Power Tools