Troubleshooting - Rotel U448CH1 Mode D'emploi

 TROUBLESHOOTING
Code Explanation
The temperature sensor of the bowl is not
E01
functioning properly
E02 Machine failure
The bowl does not sit correctly on the unit
Bowl lid is not installed
E03
Bowl lid is not locked onto the bowl
1. Too much food is being processed or
the speed is too low: the motor cannot
E04 run properly
2. The overheating protection has acti-
vated because of a long working time
E05 Overheating protection
E06 Machine failure
E07 Machine failure
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instructions for use
Solution
Please contact your local service center
Please contact your local service center
Turn off the appliance. Insert the bowl or
put the lid on the bowl, or take out the
bowl lid and reinstall it correctly. Restart
the machine.
1. Reduce food amount or set higher
speed
2. Allow the appliance to cool down for
a few minutes
Turn off the appliance and let cool down
before restarting it
Please contact your local service center
Please contact your local service center
98