Working With The Butterfly Tool - Rotel U448CH1 Mode D'emploi

Working with the butterfly tool

o
Insert the multiblade as shown before and the butterfly tool onto the multiblade.
o
Put the food to be processed into the bowl and close the lid, including measuring cup.
o
Insert the bowl into the main unit.
o
Plug in and start the appliance.
o
Set the time and select the speed (1-5).
o
A sound signal indicates when the working time is over. The Thermocooker Expert
stops automatically.
o
Turn off the appliance and remove the bowl.
o
Open the lid and take out the processed food with the spatula.
o
To remove the butterfly tool from the multiblade, hold the ball-shaped end and pull
it out with rotations in both directions.
CAUTION:
o
Only start the Thermocooker Expert after the butterfly tool has been properly in-
serted!
o
Do not use speed level over 5 when using the butterfly to avoid damaging it.
o
Do not proceed hard ingredients that might damage or block the butterfly tool!
o
Do not use the spatula to stir the processed food when the butterfly tool is currently
used.
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instructions for use
90