Removing The Bowl; Working Modes; Mode 1: Mixing Ingredients - Rotel U448CH1 Mode D'emploi

Removing the bowl

o
Wait until the cooking process is finished and switch off the Thermocooker Expert.
o
Rotate the bowl lid counterclockwise to release the bowl.
o
Lift the bowl out of the main unit.
CAUTION: The bowl may become very hot while cooking. Avoid touching the bowl and use
the insulating handles to remove it from the base unit of the Thermocooker Expert!
 WORKING MODES

Mode 1: mixing ingredients

The Thermocooker Expert is perfectly suited for chopping and mixing all kind of ingredients.
o
Assemble the blade to the bowl.
o
Insert the bowl into the main unit.
o
Put the food to be processed into the bowl and close the lid, including measuring cup.
o
Plug in and switch on the Thermocooker Expert.
o
Push the button Time and rotate the knob to set the mixing time required. Confirm
the setting by pushing the knob.
o
Press the button Speed and rotate the knob to select the speed (1-12). Press again
the Start/Stop/Reset knob for the appliance to start working.
o
A sound signal indicates when the working time is over. The Thermocooker Expert
stops automatically. Turn it off.
o
Remove the bowl from its socket and open the lid.
o
Take out the processed food with the spatula.
CAUTION: For hard food, such as coffee beans and almond, don't proceed longer than 40 sec-
onds. Wait for the appliance to cool down at least 10 minutes before the next operation!
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instructions for use
93