Tronic TWCA 30A1 Instructions D'utilisation Et Consignes De Sécurité page 32

Charge your device
1. Plug the USB type C plug
into the USB port on the USB adapter
8
USB type C plug
product.
2. Plug the USB adapter
socket.
3. LED indicator 1
when the product is under standby mode and there no mobile
device on Qi charging surface1
4. Place the mobile device on the Qi charging surface 1
2 4 . Make sure the center of the device is aligned over the
of the USB charging cable
7
9 into USB type C input socket
6 into an easily accessible mains
and 2 will light up blue for 2 seconds
2 3
and plug the
6
1 or 2 4 .
5 of the
1 or
GB/IE
33