Publicité
Les langues disponibles
Les langues disponibles
2.2 Electrical connection
This hob must be connected to the mains via an all-pole cut-off device that complies
with current installation regulations. A disconnection device must be incorporated into
the fixed wiring.
This hob must be connected to the mains power supply only by a suitably qualified
person.
Before connecting the hob to the mains power supply, check that:
1. The domestic wiring system is suitable for the power drawn by the hob.
2. The data correspond to the value given in the rating plate
3. The power supply cable sections can withstand the load specified on the rating
plate.
To connect the hob to the mains power supply, do not use adapters, reducers, or
branching devices, as they can cause overheating and fire.
The power supply cable must not touch any hot parts and must be positioned so that
its temperature will not exceed 75˚C at any point.
If the cable is damaged or to be replaced, the operation must be carried out the by
after-sale agent with dedicated tools to avoid any accidents.
• If the appliance is being connected directly to the mains an omni polar circuit-
breaker must be installed with a minimum opening of 3mm between contacts.
• The installer must ensure that the electrical connexion has been made and that
it is compliant with safety regulations.
Note : When power is first supplied to your hob, or after an extended power outage,
an indicator light will appear on the control panel. Wait approximately 30 seconds
or press any key on the control panel to make the information disappear and use
your hob. This display is normal and is reserved for use by After-Sales Service. In all
cases, it should be disregarded.
6
Publicité
