Publicité
Les langues disponibles
Les langues disponibles
Disconnect your hob from electrical supplies before
carrying out any maintenance operations.
When connecting electrical appliances to a nearby
socket, ensure that the power supply cable is not in
contact with any hot surface on the appliance.
This appliance should be installed by a qualified
technician /installer.
2. INSTALLATION
Unpacking
Remove all the protective packing pieces.
Check and respect the appliance's characteristics that appear on the name plate
(sticked on the base of your induction hob).
2.1 Building into a base unit
Check that the air intakes and outlets are free of obstruction. Comply with the
information concerning the fitting dimensions (in millimeters) of the base unit
destined to receive the hob.
Cut out the work surface according to your model: sizes shown in the drawing
(Fig.1/Fig.2).
For the purpose of installation and use, a minimum of 5 cm space shall be
preserved around the hole.
Under any circumstances, make sure the induction cooker hob is well ventilated and
the air inlet and outlet are not blocked (Fig.3).
If you are installing the hob above a drawer or above a built-in oven, comply with
the dimensions provided on the illustrations to ensure a sufficient air outlet at
the front.
Note : The hob should not be installed directly above a dishwasher, fridge, freezer,
washing machine or clothes dryer, as the humidity may damage the hob electronics.
5
Publicité
