Philips WelcomeEye Comfort Pro Mode D'emploi page 32

9 – Refit the front cover of the intercom and tighten the tamper-resistant retaining screw.
Attach a silicone seal* between the shield and the wall to stop flowing water. *Do not
use acetic acid-based silicone (vinegar odour).
10 - Connect the 230V AC power supply to the modular adaptor, for an installation compliant
with applicable standards (NFC 15-100 in France).
- Verify the smooth functioning (video call, etc.).
- When there is a second intercom panel, don't forget to configure the monitor(s).
5. Installing a camera (optional)
Connect the wires in accordance with the wiring diagram.
Choose a suitable place to install the camera.
Ensure that nothing gets in the way of the installation.
Screw the wall section with the screws provided (for solid walls).
Point the camera in the desired direction and tighten the retainer screw.
Configure the monitor(s)
Warning: no audio
6. MONITOR INTERFACE
Main Menu
Press the button to turn on the screen and access the main menu
00:00 01/01/2000
A. Monitoring function and response to a call
B. Intercom function
C. Settings
: indicates that the monitor ringtone is deactivated
GB9
On
A B
WelcomeEye Comfort Pro / V5
C
On