Philips WelcomeEye Comfort Pro Mode D'emploi page 30

3. Installing the main or additional monitor
1
4
7
1 - Position the wall bracket so that the screen of the monitor is approximately 1.60m above
the ground.
2 – Mark the location of the holes using the U bolt.
3 – Drill.
4 – Use the correct wall plugs for the bracket (those supplied are suitable for solid walls).
5 - Attach the wall bracket.
6 - Connect the 2 intercom panel wires and the 2 power supply wires in accordance with
the wiring diagram.
7 - Position the monitor on the wall bracket.
8 - Depending on the configuration selected, and when wiring is completed, the interface
may have to be configured.
Warning: during this step, do not connect the power supply to the 230V AC.
GB7
1m60
2
5
WelcomeEye Comfort Pro / V5
3
DES 9900 VDP
5 3 1 0 2 0
Wifi 2.4GHz
24V 550mA
-
+ 1/3 2/4
SMARTHOME FRANCE
19 avenue Marcel Dassault 37200 TOURS
FRANCE
5 3 1 0 2 0
6