AEG IKE96654FB Notice D'utilisation page 122

Problem
Heating up takes a long time.
and a number come on.
8.2 If you cannot find a solution...
If you cannot find a solution to the problem
yourself, contact your dealer or an Authorised
Service Centre. Give the data from the rating
plate. Make sure, you operated the hob
correctly. If not the servicing by a service
9. TECHNICAL DATA
9.1 Rating plate
Model IKE96654FB
Typ 61 E6A 04 AA
Induction 11.0 kW
Ser.Nr. .................
AEG
9.2 Cooking zones specification
Cooking zone Nominal power
(maximum heat
setting) [W]
Left front 2300
Left rear 2300
Middle front 2300
122 ENGLISH
Possible cause
Cookware is too small and receives
only a part of the power generated
by the cooking zone.
PowerSlide operates. Two pots are
placed on the flexible induction
cooking area or the cookware covers
more than one cooking area activa‐
ted by the function.
There is an error in the hob.
technician or dealer will not be free of charge,
also during the warranty period. The
information about guarantee period and
Authorised Service Centres are in the
guarantee booklet.
PNC 949 597 619 00
400 V 3N, 50 - 60 Hz
Made in: Germany
11.0 kW
PowerBoost [W]
3200
3200
3200
Remedy
For optimal heat transfer use cook‐
ware with bottom diameter similar to
the size of the cooking zone (i.e. the
maximum cookware diameter value in
"Technical data" > "Cooking zones
specification").
Use only one pot. Refer to "Flexible in‐
duction cooking area".
Deactivate the hob and activate it
again after 30 seconds. If
again, disconnect the hob from the
electrical supply. After 30 seconds,
connect the hob again. If the problem
continues, speak to an Authorised
Service Centre.
PowerBoost Cookware diame‐
maximum dura‐ ter [mm]
tion [min]
10 125 - 210
10 125 - 210
10 125 - 210
comes on